Stepper Fan Mount and Cable Organizer
Description
Mount for a fan (40x40x10) and a heatsink (40x40x11) to be used in Nema17 stepper motors. Snaps well in place. Used with the Z Stepper on an Ender 3 Printer. Preferable to use thermal paste between heatsink and stepper in order to achieve better heat transfer. Use high-temp plastics such as PETG or ABS. The part will be in direct contact with the stepper, so PLA will soften easily. I used ABS. Needed: -3mm Nuts(x4)(Fan-Mount) -M3x15mm Screws (x4)(Fan-Mount) -M3x20mm Screw (x1)(Mount-Zed Bracket) -M3x9mm Screws (x2)(Mount-Stepper) -M4x8mm Screw (x1)(Mount-Carriage) -M4 Locking Nut (x1)(Mount-Carriage)(comes with the printer) Any question: feel free to comment down below.
Statistics
Likes
17
Downloads
0