OmniStand Rear Filament Holder
Description
This ought to work with both the FlashForge Dreamer and the Dremel IdeaBuilder 3D20. I love the OmniStand ecosystem, and while I like the existing rear mounting mod, I wanted to turn my spools sideways so they take up less room, and I think the filament flows more smoothly also (using the existing filament guide from the existing rear mounting mod). So this mod uses the existing 80mm fan placements, which in the Dremel 3D20 are unused (no fans), with a bracket that goes on the inside of the printer to honestly make it easier to install, but also I think it adds some strength. The inside bracket includes a replacement stand off to hold the PTFE tubing that is inside the printer for when you use spools inside the enclosure. Use (4) M3 x 12mm long socket head cap bolts with hex nuts to do the mounting. You can use longer bolts, but 12mm long is the minimum. You will also want to print any rods and spacers from the original [OmniStand Adjustable Filament Spool Stand](https://www.thingiverse.com/thing:652415) as well as the backside filament guide and spool stand from [OmniStand Mod Backside with Filament Guide](https://www.thingiverse.com/thing:1238389)
Statistics
Likes
3
Downloads
0