Guitar Pedal Enclosure
Description
If you're building your own effect, you can put it in here. 1/4" jacks mount on the back for in and out, and a 2.1 mm power jack can be mounted too. There are two sizes of enclosure included, for smaller and larger DIY guitar effects. The dxf or stl file of the face plate can be used as a template for your own needs, adding holes for potentiometers and switches and such before lasercutting or 3D printing. The larger enclosure has an additional hole for mounting an expression pedal or footswitch jack (1/4") and a couple of posts for securing a circuit board with #3 screws*. Use M3 screws to attach the faceplate. The holes are sized so that the screws will thread themselves and hold just fine. *these: https://www.mcmaster.com/#92114a094
Statistics
Likes
15
Downloads
0