Voxel Cloud Shelf with invisible Mounting Plate
Description
All parts are printable without support. I printed the cloud with a 1mm wall and 7% infill. With standard PLA no brim was used, just iwth the wood PLA (which is warping otherwise) I added a 4mm brim, but this was more than enought. The assembly is quite self explaining but some hints to make your life a little easier - Sand the connecting pieces - Lubricate the mounting plate (I used silicon oil, also soap should be fine) - Put the screws in before fitting the pieces together - Try the splint in the main piece and the mounting plate separately, this is not designed to be removed easily on the final connection, either you can remove it with a knife or by destroying the splint with a drill Before you try to fit the parts you should already put the screws in the mounting plate, this makes the removal of the plate easier
Statistics
Likes
23
Downloads
0