Core A8 45° Brace - 25.4mm
Description
PRINTING INSTRUCTIONS ------------------------------------------ Print face-down. No supports needed as most severe angle is only 45°. If you print the round version of the clamp, print it vertically, no supports needed. ABOUT -------------------------------------------- Angled brace for the Core A8 to help with the wibbly wobblies. Compatible with the "Large Clamp" from the original Core A8. Printed and installed on my machine, works super well. Frankly, it's overkill, but whatever. 25.4, 20, and 25 mm variants (Fixed the 20, 25 versions) and a special 24mm round version and clamp that was requested by a fellow user.
Statistics
Likes
0
Downloads
0