Foot of Amiga 4000T
Description
This is the foot of Amiga 4000T case. Until now I have never printed this model. I took great care to make this model as accurate as possible. Regarding the model width: I set the inner width to 184 mm because I assume that you will stick felt washers of 2 mm thickness on each inner face (like it was done by Commodore/Escom too). 2 mm felt washer + 180 mm tower case + 2 mm felt washer = 184 mm inner width Please double check if this is fine for you before printing. If you want to modify the width then * Open the f3d file in Fusion 360 * Navigate to "Foot" -> "Sketches" -> "Front (Foot)" and select 'edit sketch' * Look at the image a4000t_foot_img4.png for the color codes * Edit the green highlighted dimension to adjust the width of the left felt washer (the right one will change as well automatically) * Edit the pink highlighted dimension to adjust the width of the tower * The yellow and the cyan dimensions are updated automatically and are just for information. * Click the 'stop sketch' button Regarding the license: The only reason for me to add the non-commercial restriction to the license is, that I've used the free version of Fusion 360 (hobbyist license) to draw the model. This Fusion 360 license doesn't allow commercial usage.
Statistics
Likes
8
Downloads
0