Holder for aquarium level controller hose (and narrow clearance between top glass and the sides)
Description
I designed this because on my Dennerle Nano Cube the original hose clip of my Tunze Osmolator nano didn't fit without lifting the lid. So I made a thing which needs only 5mm clearance between the top and side glass. Just press fit the hose into the holder and fix it with a cable tie. if you are frightened of the hose may fall out, you can use a drop of hot glue to keep it there. Then use the screw to fix the assembly to the aquarium glass (max. 5.5mm) Use the holder_in for 0.25in hose and the holder_mm for the 6mm have fun :-) I designed this as part of my Aquarium mod series: published project parts so far: + Fluval Flex Cooling Fan Adapter 40mm https://www.thingiverse.com/thing:3640543 + Fluval Flex Cooling Fan Adapter 80mm https://www.thingiverse.com/thing:3671625 + Fluval Flex Filter Mod https://www.thingiverse.com/thing:3639353 + Suction cup temperature sensor mount for DS18x20 https://www.thingiverse.com/thing:3640844 + water level controller hose clip for Fluval Flex filter compartment https://www.thingiverse.com/thing:3675744
Statistics
Likes
70
Downloads
0