5-inch Waveshare LCD & Raspberry Pi Stand and Case
Description
This is a case and stand for the Raspberry Pi and the 5-inch Waveshare HDMI Touchscreen LCD. https://www.waveshare.com/5inch-HDMI-LCD.htm https://www.waveshare.com/wiki/5inch_HDMI_LCD ### Description The Raspberry Pi header connects directly to the back of the LCD and makes for a very compact unit. The HDMI connectors of the Pi and LCD are positioned directly next to each other to permit the shortest HDMI connection possible with the included HDMI connector (supplied from Waveshare with the LCD, see manufacturer link for photo). This is a remix of a stand that I needed wider base support to prevent falling over, with added 0.5-inch diameter, recessed rubber feet to prevent sliding on smooth surfaces. I also added a hole for a 1.3 mm barrel connector that I use to power the Pi & LCD, which the power connections are soldered to the micro USB test pads of the Pi (not enough space to use a micro USB connector). There is a micro USB port available on the right side of the case that can be used to power the LCD and Pi. IGES files have also been provided to enable easy editing.
Statistics
Likes
113
Downloads
0