Leg / Foot with Rubber Cap to Protect Floors
Description
Files are included to print a foot for whatever you may need. I used this for a down-firing subwoofer that needed some. I used flexible filament at the point of contact with the floor. This could protect a nice floor while sliding and in my case protect against any rattling against a hard surface. Any screw with smaller than a 3/8" diameter head (9.5mm for anyone north, east, south or west of the US). The through hole is 1/8" (a little over 3mm) and features 1/8" of solid material to screw against. Caps did not need adhesive to in my experience and just fit on nice and tight. I used Priline black tpu for the flexible and found it easy to print: https://www.amazon.com/gp/product/B074DV9JMX/ref=as_li_tl?ie=UTF8&tag=3dprinting456-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B074DV9JMX&linkId=dfaa65fe5b981cbf7396d5df3f4f5c3d The silver looking PLA is this: https://www.amazon.com/gp/product/B06XK3BM4W/ref=as_li_tl?ie=UTF8&tag=3dprinting456-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B06XK3BM4W&linkId=60f5cd732fd9e16714da809aafd76516 See print settings for info on the TPU.
Statistics
Likes
5
Downloads
0