Xray rear wing-post Xb4 XB2 XT4
Description
!! UPDATE June 2019: The part fits nicely ... but when printed in regular PLA, it just snaps, breaks on any hard crash. I suggest using something else then regular PLA, infill ... As said lower: the regular Xray-part is still stronger. I'll test some printed in TPU or NYlon and keep updating. ***************************** Broke one of my wingposts on my XB4. Xray-parts are expensive so I thought I might give it a try. Has not been tested yet! Might also add some other versions with different (attack-)angles in the future. Might also add a tube inside in which a piece of piano-wire or copper wire could be added while printing (just use pause-function near the end of the print) which could add on rigidity. Pro's: * print and use your own colour * brake one, just replaced it for a couple of cents (* in future designs: use a more or less angled wing) * will fit the XB2, XB4, XT4 (XT2 uses other rear postst Neg's: * when using your own parts, you don't support the awesome Xray-people * will most surely be more fragile and break then the real xray-part
Statistics
Likes
19
Downloads
0