Disc golf wall mount disc shelf for 3/4 rods
Description
<h1>DESCRIPTION</h1> These are wall-mounted brackets to make disc shelves in combination with 3/4" dowels or similar rods. They are large enough to fit large-diameter midranges (180g class), all drivers and, putters. <h2>PRINT SETTINGS/FILAMENT</h2> Supports not required I have tested both PETG and PLA. Both work fine. ABS would work well, and a CF filled Nylon would be okay. Regular nylon not recommended due to flexibility. <h2>INSTALLATION</h2> You can use one of each for a shelf, or three "middle." If you use 3 "middle" you will lose about 2 discs of storage space. I recommend securing the rods to the brackets with a 1/2" wood screw for maximum security. Pre-drilling is recommended to prevent layer separation and wood splitting. I used blue plastic anchors and #10 screws to put 3x 4 foot shelves on the cinderblock walls in my basement. They would also work for drywall.
Statistics
Likes
43
Downloads
0