Captain Slug AyyLMAO Foregrip Update (Key-in design)
Description
A remix of Captain Slug's AyyLMAO foregrip, which is designed to go with the ESPER foregrip. The main body slides onto standard sized picatinny rail and the tooth "keys" in. If you are using with an ESPER foregrip, the fins nearest the blaster are thin wall and should be able to flex enough to install. WARNING, once you snap this into your ESPER foregrip you probably will not be able to get it out without breaking it. Upgrades over original design: - Single piece body - Uses a single #10-32 - 2" screw and nut versus two screws and nuts. STLs should be properly oriented for printing. For the foregrip body I recommend supports and maybe a brim. If you have issues with PLA cooling and subsequently curling at overhangs I have found that printing outside-in has helped.
Statistics
Likes
11
Downloads
0