Base for mounting EEZYbotARM MK2 to FPV-Rover
Description
Base with lateral arrangement of the rotating servo drive. With reduced height. [FPV-Rover V1.21 ](https://www.thingiverse.com/thing:3453213) or [FPV-Rover V1.31](https://www.thingiverse.com/thing:3867134) [EEZYbotARM MK2](https://www.thingiverse.com/thing:1454048) You can also use: [Adapter with rotation for Mantis Gripper to EEZYbotARM MK2](https://www.thingiverse.com/thing:4148341) [Adapter for Mantis Gripper to EEZYbotARM MK2](https://www.thingiverse.com/thing:3685639) Purchased parts: - M3 x 6 4pcs (for mount servo) - M3 x 20 2pcs (for mount cap) - M3 x 10-12 5pcs + M3 x 16-20 1pcs (for V1 locks) - M3 x 6pcs nut (for V1 locks) - 3-4pcs [Servo 995](https://megabonus.com/y/2OjoX) or [946](https://megabonus.com/y/Spc10) - 25pcs [Ø6 mm ball spheres](https://megabonus.com/y/9XeUd) - 1pcs [606zz bearing](https://megabonus.com/y/eW1Ej) - and other parts for assembly [EEZYbotARM MK2](https://www.thingiverse.com/thing:1454048) and [FPV-Rover V1.1/V1.2 ](https://www.thingiverse.com/thing:3453213)/[FPV-Rover V1.3](https://www.thingiverse.com/thing:3867134), see the description on their page - 1x [Grease for Plastic Gear xy-2 ](https://megabonus.com/y/Vis7G) Options: - 1x [2pcs 4CH Frsky Receiver](https://megabonus.com/y/VlNaF) or [8CH Frsky Receiver](https://megabonus.com/y/wfsPB) or [SBUS To PWM/PPM Decoder 8 Channel Converter](https://megabonus.com/y/Lv0rE) + Receiver with SBUS or [Crossfire Receiver](https://www.team-blacksheep.com/products/prod:xf_nano_div_rx) or [CRSF to PWM Converter](https://megabonus.com/y/k6zNM) + Receiver with Crossfire or [CRServoF "blue pill" project](https://github.com/CapnBry/CRServoF) - 1x [Servo tester](https://megabonus.com/y/ofcJB) To fix the locks of the old version, use glue, to fix the locks of version 1, use screws and nuts. Printed parts
Statistics
Likes
73
Downloads
0