PyGamer Snap Fit Case
Description
***UPDATE August 6 2019*** Version 2 is 2mm thinner and includes an updated bottom half with cutouts for female headers. Fit Enclosure This enclosure is designed to secure the PyGamer PCB without any hardware screws. The PCB rests on bottom half with built-in standoffs. The top half features cutouts for the thumb stick, buttons and display. The two halves snap fit together and clamp shut. Features on the edges of the snap allow the case to firmly stay shut but also allow it to re-open. Assembly photos in Learn Guide https://learn.adafruit.com/pygamer-snapfit-case/ Adafruit PyGame https://adafru.it/4242 Mini oval speaker 8ohm 1w https://adafru.it/4227 350mah 3.7v lipo battery https://adafru.it/4237 Fully reversible microUSB cable https://adafru.it/4111 Button caps https://adafru.it/4228
Statistics
Likes
179
Downloads
0