Null 2 - Retro Gaming Handheld
Description
The Null 2 is a DIY handheld games console powered by a Raspberry Pi 0, with a 3.2" screen and all the buttons you need to play some retro games. These are the files for the acrylic, wooden, and 3D printable cases for the Null 2. Get the Null 2 here: https://www.tindie.com/products/Ampersand/null-2-kit/ For more information on how to use these files, visit https://www.null2.co.uk/ The 3D printable files haven't been widely tested yet so let me know if there's something I can improve. There are 4 versions for the back half of the case: Those marked as XL are 3mm bigger to accommodate a bigger battery. The versions marked "Support" have an extra pillar in the center that will make it feel more rigid if you aren't using the space for other modifications. There are 2 versions for the face buttons: Those marked "soft" are for the rubber membranes included in the kit. Those marked "click" are for use with tactile buttons like the Start/Select buttons. To print the standard case, you will need to print the following 9 STLs: Null2 Back V1.2.STL Null2 Bottom Button V1.2.STL Null2 Dpad Soft V1.2.STL Null2 Face Buttons Click V1.2.STL Null2 Face Buttons Soft V1.2.STL Null2 Front V1.3.STL Null2 Mute Switch V1.2.STL Null2 Power Switch V1.2.STL Null2 Shoulder Buttons V1.2.STL
Statistics
Likes
54
Downloads
0