Prusa MK3 MMU2/MMU2S Lack rack filament wallet
Description
Wallet for Prusa MK3/MK3S MMU2/MMU2S. Fits behind the printer. Designed specially for Prusa MK3 MMU2 inside lack rack. Each filament will retract into wallet upon filament color change. Tested with petg, PLA and ABS filaments. Parts needed: 6x - M4 threaded rods, cut to length 84mm. 1x - M6 threaded rod, cut to length 88mm. 2x - M6 lock nuts 12x - M4 lock nuts 5x - 608zz bearings 8x - wood screws for wallet wallmounts. + 3d printed parts. (see how many you will need of each STL file below). 4x - m4_spacer.STL 10x - 608zz spacer.STL 1x - bottom_end_cap.STL 6x - upper_divider_plate.STL 6x - lower_divider_plate.STL 2x - wall_bracket_right.STL 1x - retainer_ring.STL 5x - Lower-divider.STL 1x - Fold-out-lock.STL 5x - Upper-divider.STL 2x - wall_bracket_left.STL 1x - Fold-out-divider.STL 5x - 65mm_idler.STL MMU2 modifications: 1. Adjust PTFE tubing length into the MMU2. 2. Also recommend this MMU2 modification for easier access to MMU2 buttons: https://www.thingiverse.com/thing:3211711
Statistics
Likes
15
Downloads
0