12/24v USB Charging Socket for Ender 3
Description
I bought a USB socket from ebay and mounted it under the display. It aligns perfectly well with the popular Display PCB Cover https://www.thingiverse.com/thing:2858209 Included in the STL is a template for drilling out the metal frame. Just make sure the edges are flush and the F looks like an F. (M5 bolts) It's a bit tricky to get the bolts in. I took the whole thing off to make life easier. (it's only 2 bolts and your ribbon) As you can see the power cable will run along the internal channel of the extrusion and up into the PSU. I have also added a cable clip which cli[s into the upright 20x40 and grabs your power lead as it passes the 2 bolts that secure the bottom cross member. Print upright as it looks in the STL above
Statistics
Likes
5
Downloads
0