Mini Apple iBook G3 Laptop
Description
Remember that time that Apple went through their Shampoo Bottle phase of design? Good times... This is a slightly complex build due to the working hinge. You will need a paperclip to work as the hinge pin. Print the parts with _color in their name in whatever color you like, the keyboard and mouse pad in white, and the rest in natural PLA if you can - otherwise white is fine. 1. Glue the color parts to the partner first. 2. Glue one of the hinge parts to the bottom assembly. Then straighten out the paperclip, and pass it through the top assembly, and into the hinge part you glued in step 1. 3. Cut the paper clip so that it is about 3mm (1/8") part the end of the hinge at the top assembly. Then insert the other bottom hinge part into the clip, and glue it in place (it's a bit tricky, but just go slow and you will get there). 4. Once it's all glued and working, apply the stickers and the screen label. Too lazy to print your own? Buy one from our store http://store.rabbitengineering.com
Statistics
Likes
107
Downloads
0