T3P3 Kossel Release 3 Hotend with nut slots
Description
I got sick of the "threads" in my T3P3 kossel's hotend holder stripping whenever I tried to tighten the m3 bolts to a decent amount, so I modified the openSCAD source file for the part to include some cut-outs for m3 nuts. I made sure to print with enough solid top/bottom layers to ensure that the plastic between the nut and the effector is solid. I recommend using washers on the bolts to avoid crushing the plastic of the effector. I use m3 nyloc nuts by using m3 bolts to pull the nuts into place before tightening. source: https://github.com/T3P3/kossel License is *actually* GPL3, not GPL2: https://github.com/T3P3/kossel/blob/master/LICENSE The STL you want is Kossel-Hotend-With-Cutouts3.stl
Statistics
Likes
0
Downloads
0