Ninebot ES1 ES2 ES4 Accessory Support
Description
(edit) Added V3 - This new design accounts for the oval cross section of the tube and has a hinged design. Hence, it requires independent RH and LH models. Kept both models so you can choose the one you like the best. The hinged design is kind of a nightmare to print due to the need of supports on the hinge part. Selective supports might help you avoid unnecessary supports. This is an accessory support for the Segway Ninebot ES1/ES2/ES4. You'll need two identical prints to install. Model uses Allen M3 screws and self-locking nuts. Please double check the type of attaching hardware you have available and make changes accordingly. Brackets are round, but the actual Ninebot stem's cross-section is a little oval. Improvement opportunity here. Printed with the rod axis parallel to build plate for better shear resistance when assembled. Used supports and 50% infill. Feel free to try other slicing schemas. When attaching the set to the scooter, use some rubber gaskets to improve stability and prevent vibration from moving the brackets.
Statistics
Likes
49
Downloads
0