Xiaomi WOWSTICK Holder
Description
The aim of this project is to make a more compact and more portable case for the xiaomi wowstick screwdriver. I recently bought the 1F+ version and since then, i found really unconvenient storing bits onto the 3 tubes they endow you. So i decided to make my own box for the essential things: - The WOWSTICK itself - All the 56 bits - The USB Cable (since this is the version with Li-Ion Battery) It consists of two parts: - The main part, which holds bits and the screwdriver. It's made of TPU to make easier the insertion of bits and could be also used as a standalone part on your desk bench. The cool thing is the lower space for inserting longer bits wihout compromising space. - The external part, wich make the whole thing portable and holds in place both usb cable and the screwdriver. This one is made of PLA+ but any rigid material should be ok. All in all, I tried to keep the design as minimal as possible, similar to that adopted by xiaomi, without sacrificing both practicality and **printability**, thus, **no supports or post-processing is needed**. This should works for other versions of the screwdriver, maybe leaving out some holes ffor bits. The filament used are: [TPU SAINSMART](https://www.amazon.it/SainSmart-piccola-flessibile-precisione-dimensioni/dp/B071SJ8SDQ/ref=sr_1_17?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=SainSmart&qid=1561310152&s=gateway&sr=8-17) [PLA+ SUNLU](https://www.amazon.it/SUNLU-Filament-Printing-Dimensional-Accuracy/dp/B073PB9XWY/ref=sr_1_3?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=pla%2B&qid=1561310311&s=gateway&sr=8-3) Print: - Case_top with PLA - Case_bottom with PLA - Bit_holder with TPU
Statistics
Likes
113
Downloads
0