20 x 20 Extrusion Switch Holder for 10 x 15 mm Switch V2
Description
I remade my last switch holder, so that it would take smaller switches which i thought would look neater: https://www.thingiverse.com/thing:3610323 The switch holder features a square hole at the back, should be helpful when wiring the switch and one on another face, if you follow my pictures, this is to allow the wires to neatly be ran to the tubing strips in the z axis extrusion part of the frame, making them almost invisible When fitted in the configuration I have in my pictures, there is a small hole on top to feed the wires from the L.E.D strips, this hole may be too small for both cables, after printing I had to widen this hole. I think this version looks much cleaner and neater than my V1 I designed this for use with: Dooder_Snicke's light bar https://www.thingiverse.com/thing:2765441 Switches I used: https://www.ebay.co.uk/itm/10pcs-10-15mm-Mini-Black-On-Off-Boat-Rocker-Switch-Rectangle-SPST-2PIN/263534812190?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Both .3mf & .stl included
Statistics
Likes
8
Downloads
0