Nintendo Switch Headrest / wall Mount
Description
This is a simple Nintendo Switch headrest mount I made for my son. I wanted something simple to 3D print, simple to attach, and fast to install the Switch. I did not want the mount to be rigid to prevent the switch from bouncing / shaking when driving. Using the two open eyes, this mount can be attached to the seat headrest in numerous ways, such as with Velcro (see photo,) shoe lace, string, lanyard, chain, Zip ties (See Photo. Very handy, and can reach across between both seats if wanted in the center of vehicle) and more. It can also be mounted to a wall, and has other uses too. The mount allows the switch to simply slide in from the top. It does not have any clamps, allows the speakers to function and has a large access for the USB port, which can also be used to push the Switch out. For those who have concerns about scratching, the mount does not touch any part of the screen or bezel. I made the mount large enough to allow tape to be placed in the slots to prevent any scratching. Note the Joy-Cons cannot be attached to the switch when in this mount. (Note if you live in a hot climate, make sure you remove the mount when you leave the vehicle, or print it with a high heat material to stop it warping. This goes for all 3D printed items left in a vehicle)
Statistics
Likes
77
Downloads
0