Filament Rack
Description
Filament rack that I modeled to use inside IKEA Lack -enclosure. Each end consist of 4 pieces. I used superglue to hold the upper part to the lower part, supports and zip ties holds the vertical pieces together. I used 20 cm diameter filament spools when modeling this and you have to slightly tilt the spools to get them in place. To build this you need: Printed parts - end pieces x 2 - support x 4 From hardware store - 12 mm wood (or other material if you want) rods x 8 (i used 50 cm in length) - zip ties Overall printing and assembly took 1,5 days
Statistics
Likes
15
Downloads
0