Key Holder Boxer Logo - (Proteus Key Holder Remix)
Description
This swiss army style key holder was remixed and inspired by the Proteus Key Holder by ProteanMan. I really liked the original design, but wanted to make some modifications based on my own preference. Modifications include: 1) lower profile dimensions (about 1/2 thickness from the original design) 2) Updated hardware sizes (designed to use 4-40 low profile socket cap screws and hardware) 3) Logo was changed to a boxer engine logo Overview: As with the original Proteus Key Holder design, this works like swiss army knife with your keys folding into the holder. This is a remix of the "Regular" size which fits common key sizes (i.e. house keys, mailbox keys, car keys, etc.) Recommended Hardware: -3x Low-Profile Socket Head Screw, 4-40 Thread Size (chose length as desired for # of keys) -3x Hex Nut, 4-40 Thread Size -Nylon Plastic Washers (as desired to separate keys) Printing: Recommended printing in ABS or other higher strength plastic. Recommended printing with higher infill. Orient the print so that the flat side (without logo) is on the print bed Assembly: Hex Nuts are easily press fit into 3D printed model. If you don't have a press, you can use a clamp, vise, pliers, etc to press them in. Low-profile socket cap screws slip fit through the model Keys may be separated by washers if desired
Statistics
Likes
154
Downloads
0