Rear Turbo cooling fan WANHAO
Description
***Any Emi Interference Can Be Resolved By Putting A Single Folded Sheet Of Aluminum Foil Flush With The Motors Behind The Plastic. And Another Flush With The Rear Of The Fan In Front Of The Plastic. Which Makers 2 Layers Before The Fan*** Let Me Know If You Like This Thanks! This Is The First Of Its Kind.... A Rear Facing Turbo Style Fan Used On A Wanhao Duplicator 4 No Other Fan Design Is Like This. And Gives Complete Access To See On The Front While Blowing Lots Of Air From Behind. It Uses No Screws, It Clips In. Its A Tight Fit. ***It Might Be Easier To Unscrew The Extruder Assembly From Underneath, Remove It Out The Way Then Clip It On And Put The 2 Screws Back In...*** But I Did It Without. I Printed It On Its Side With Support Using Simplify 3D. You Will Have To Mess Around With Supports. But You Will Get There. I Used A Fan Like This One From Ebay. Http://Www.Ebay.Co.Uk/Itm/2-Pin-Connector-Brushless-Dc-24V-0-15A-Turbo-Blower-Cooling-Fan-/191037705258?Pt=Computing_Computercomponents_Fans_Heatsinks_Sr&Hash=Item2C7Abc0C2A ***Flashforge Prototype Version Included, Thanks For Luke To New Dimensions***
Statistics
Likes
51
Downloads
0