BLTouch center mount MK2 Wanhao and clones
Description
On ADVi3++ Patreon i saw that my old design (https://www.thingiverse.com/thing:3534775) had some measure issue, the "zero Offset" was not really 0.... more like -1.5 ( my bad)... the second measure problem is more a misunderstanding, there is a difference between my measurement and the one "corrected" of around 3mm that, I think, is due to the support being mounted and the placed flush with the metal support in the front, it was ment to be pushed toward the extruder... But now I've re designed it completely ( with cable management idea took from https://www.thingiverse.com/thing:3635758) and keeping my mounting strategy giving that I already had the screws (M3x6 and M3x4) I've provided a technical drawing to double check measurement and a picture of the final product mounted. As we are talking you need to use a custom setting in ADVi3++ but Sebastien will be informed of this change and if he decide to change the mount in teh firmware I'll update this page ( or maybe directly delete the old version
Statistics
Likes
35
Downloads
0