Toyota Custom ML-ACR Switch and LED
Description
I designed this switch to mount in the factory switch locations on a 5th Gen Toyota 4Runner. It utilizes the mictuning aftermarket switches commonly found on amazon. Remove the switch from the housing, cut the switch housing flat and attach this switch plate. I used an on-off-on switch from mouser/digikey after I confirmed with Blue Sea Systems that the switch only needed to be rated for a few miliamps. The LED is a 12V led so choose one you would like. This allows you to center the switch for Auto mode, flip one direction for engage, and another direction for disengage.
Statistics
Likes
3
Downloads
0