Huina 1550 "5 Finger" Rake
Description
** Huina 1550 excavator "5 finger" rake. ** * REQUIRES my quick coupler OR the screw-cylinder mod. There is no square hole in this to drive it from the stock bucket motor ! * Requires (2x) M4x45 bolt and nut to make the attachment pins. Quick Coupler : https://www.thingiverse.com/thing:3723652 Screw-Cylinder mod : https://alexnld.com/product/huina-metal-strength-main-arm-second-arm-bucket-arm-driving-rod-for-rc-excavator-rc-car-parts/ The two 3mm holes that go through the entire rake are made to insert M3 bolts for rigidity. You could also use some kind of metal rod glued in there. I will use 2 pieces of all-thread m3 rod with a nylock nut at each end.
Statistics
Likes
49
Downloads
0