Modular RPG Miniatures Riser
Description
### Description This is a modular, snap fit riser for representing verticality on your 1 inch (25mm) hex grid RPG play surface. - **Riser** - Sections snap together infinitely and are 1 inch high each. - **Platform** - Snaps onto the top and can support up to 33mm miniature bases. - **Foot** - _(optional)_ Snaps onto the bottom and will provide a bit more stability when you go more than a few risers high without blocking any adjacent hexes. _If you make some of these, please post a make with your favorite miniatures! Also feedback is welcome and appreciated!_ ### Printing Notes - **Riser** - These are accidentally a pretty good stringing test, so if you're not well calibrated or your filament is prone to stringing, these may require a bit of light filing and/or heat gunning to clean up in post. Nbd. - The final bridge at the top of the riser can be prone to just enough of a collision with the nozzle to knock your print loose in some cases when the part warps slightly due to cooling while printing. A brim can help with this if you can't adjust your part cooling to reduce any warping. ### Future plans - 2 inch platform - bigger foot (if needed for 2 inch platform stability at greater heights) If any of these future things are desperately needed by anyone, let me know. My group just hasn't had a need yet, so I've deferred making them, but they will take very little time to make and upload if there is a public outcry for them.
Statistics
Likes
55
Downloads
0