Marui R/C TPU rear tires (flexible)
Description
These are rear tires for the Marui Super Wheelie Jeep CJ-7 and Toyota Land Cruiser, as well as for the Hunter and Galaxy buggies. Has been printed in TPU filament. Result is very promising. Layer: 0.1mm Bead temp: 60°C Extruder temp: 225°C Speed: 22mm/s Total print time for 1 rear tire: 28h The TPU is almost as flexible as the original rubber in the exact same thickness. And still quite strong. The inner sleeve must also be made in flex material. It's way easier to install. All those parts can be mixed with the original components. So you can use the flex sleeves not to damage your original tires for instance. Or mix original rims with tires. Original complete wheel weight: 89g Fully 3D printed wheel: 58g -> meaning 60g weight saving on the rear rotating assembly !! Spike tires (OEM reproduction) https://youtu.be/3wpZwYIrSIY Slick tires (completely useless but looking so agressive on a shelf) https://www.youtube.com/watch?v=zXBBuKV7PK8 Also available is the "Sand Willy" rear paddle tire compatible of course with the Hunter, Galaxy, and Super Wheelies. I am going to add new treads in the future. So please consider that it's a work in progress. Please post you makes! Link to the rims: https://www.thingiverse.com/thing:3640219
Statistics
Likes
9
Downloads
0