Divided Carrier (smaller print bed) for Filament Carousel
Description
I modified the carrier piece of BensHacks' Filament Carousel to allow it to be printed on smaller print volume printers such as the Ender 3. I cut the "wing" portions off and divided it into 5 total printed parts, one main body, and four wings which connect together with pegs that insert into holes in the main piece. I would recommend using CA glue or some other kind of PLA compatible adhesive to connect the components together. Be careful if you're using CA glue, the peg being pushed into the hole is going to cause excess glue to spray out, so use it sparingly and try not to get it in your eye. You need to print: 1x of carrier main 4x carrier wing You still need to print the base and hub pieces that can be found on BensHacks' original thing page. Apologies to anyone who downloaded and printed v1 and v2 of the wing model, the pegs were oversized and have been corrected in v3.
Statistics
Likes
1
Downloads
0