Tool Holder
Description
Designed to fit onto the edge of a particle board desktop. Can hold a hand tool and can be easily moved to another location. Bushings can be used to reduce inside diameter. The first one requires no support. The second slotted one will but it's quicker to print the first one and nip out an opening with wire cutters; you decide. Gap is 19mm to slide over a slab of particle board and tool holes are 12mm dia. The third one has an 18mm gap to fit 3/4" plywood First bushing has 10mm opening for smaller diameter handles. Second bushing has 3mm opening and is longer to support tiny screwdrivers. Added length keeps them from flopping around The small hole in the top of the holder is for a thumbtack for added security. 2020_04_29: -Uploaded Hammer_Holder. The two pieces can be joined with a pair of M4 flat head screws and nuts for added strength. It's just big enough to hold a tack hammer. 2020_05_01 -Deleted Hammer_Holder as it had a weak spot that I've eliminated -Uploaded Hammer_Holder_Bracket -Uploaded Hammer_Holder_Fork. These two pieces can be joined with the more common M4 button head machine screws and nuts. For best results print these two with 100% fill for maximum strength.
Statistics
Likes
4
Downloads
0