Spears 1.5in Half Nut
Description
This is a Half nut designed to replace a cracked valve nut on glued pipe. The two Nut halves (A and B) fit over the existing pipe and are bolted together with 0.25in diameter bolts 1.25 in long. Watch the layer height as it impacts the threads quality, 0.2mm was sufficient for me. Print with the threaded side down to avoid having to use support. Edit 7/19/19: Updated STL Files to correct undersized / tight press fit for captive nuts on B side. Nuts can be melted into original STL files to correct the issue if they are too tight. Parts Needed: Printed Half A Printed Half B 4 X 1/4-20 1.25in bolts 4 X 1/4-20 Nuts
Statistics
Likes
6
Downloads
0