Honda Rebel Bobber Electronics Pan
Description
If your like me and you tore off all the crap on your honda rebel 250, you had to find a place for all of the electrics that was mounted to the air box and etc. Initially I just wire tied everything to the frame. It works, but was messy. So I designed this extremely simple pan that sits under the seat above where the air box used to be. It drops in and is secured in by zip ties. You can zip tie everything together and everything just fits in the pan, and stays put. Fuse box, relays, flasher etc.... Must be printed with support. My first print was 2 walls, 3 bottom and 3 top. 10% infill cubic. I cracked it trying to push the wires in place. So a bit more infill and maybe 3 shells would be better.
Statistics
Likes
2
Downloads
0