Motor Mount for 2040 extrusion (Tevo Tarantula Y-axis)
Description
Fully self supporting motor bracket for 2040 aluminium extrusion. -- I'm not sure if the homing setup works if you have a stock Tevo Tarantula. In my case it works, but i have a different linear-rail setup. Please check before homing your printer! -- things you'll need: - 3 bolts for your steppermotor (the original from the tarantula are fine) - 4 M4 bolts for mounting the bracket to the aluminium extrusion - 4 M4 T-slot bolts - 1 Gt2 idler pulley with a 4mm bore (i used one with teeth) - 1 M4 x 20 mm bolt for the idler pulley included the .part file if you want to change something.
Statistics
Likes
4
Downloads
0