LCD Mounting Bracket (Used for: No Frame Guide Required)
Description
I made the mount to go with the CR10 Portable by chips777 file labeled: "LCD_Mount_No_Frame_Guide_Required" found here: https://www.thingiverse.com/thing:2764920 I used counter sunk screws M4 x 8mm found here: https://www.amazon.com/gp/product/B06Y3JDM4R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 to fasten it to the side frame of my CR-10S as, I needed a different orientation than what the stock file offered due to my current setup. Plus you will need 2 EA M4 T-Nuts found here: https://www.amazon.com/gp/product/B01FOC6ADE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 To mount the LCD Mount to the mounting bracket I used two different sizes of M6 x 10mm and M6 x 16mm butted up together on either side, because I didn't have an M6 x 25mm to go all the way through used with a nut on one side and you will be good to go. However, the solution I came up with works just fine as well, since there is not a lot of weight to be concerned about.
Statistics
Likes
4
Downloads
0