Printrbot simple 1405 part 1116 no sag mod

Description

My Take On Trying To Reduce The Sag On The Printrbot Simple Y Axis. Just Added Flanges To Part 1116 Of The Printrbot Simple 1405 To Hold The Lm8Uu Bearings In Place Better And Reduce Wobbling. The Part Is Divided In 2 So That It'S Easier To Print (One Of The Stl Parts Is Upside Down, Flange Down, Remember To Flip Before You Print). The 2 Halves Are Held Together Well Enough By All The Screws And Zip Ties. It'S Probably Not As Good As The "Printrbot Simple, 300Mm Y Axis-No Sag!" By Iamjonlawrence, But Its Good If Your Not Up To Modifying Your Printrbot Simple Too Much. -Mupp-

Statistics

Category

Tags