Universal Caliper Mount
Description
Simple Caliper mount inspired by https://www.thingiverse.com/thing:3691708 from agryson. Should fit a wide range of calipers, but if yours doesn't fit you can adjust the uploaded Fusion 360 file. It's designed to mount on a peg board with 15mm spacing. I used M3 brass inserts to screw it in from the back of the peg board. [M3x4mmx4mm]: And to make your caliper stick without wiggeling you can insert magnets from the back of the mount. There are holes for different magnet diameters. Ø8mm Ø10mm Ø12.8mm I recommend printing the part with multiple colors with the filament swap technique. If you don't know how its done: https://blog.prusaprinters.org/color-print/ If you have a prusa printer you can also use my presliced gcode here: https://www.prusaprinters.org/prints/4465-universal-caliper-mount Please share your prints ;) ****************************** The inbus mount you see on the last picture is also designed by me: https://www.thingiverse.com/thing:3900256 ******************** Edit V1.1 Added a version with 3mm countersunk holes to mount it to a wall
Statistics
Likes
36
Downloads
0