Mobile Soldering Station - Quicko T12-942
Description
This is a DIY soldering Station to use anywhere. I modifyed it a little from my very first version but this version is not on thingiverse! You need Buegel.stl for both versions, i choosed 4 M3 Screws but this was too much... You need 4x M2,5 then it fits perfectly. Gehaeuse_v1.stl is for a 6s2p with many space for your electronic parts. Gehaeuse_v2.stl is for a 6s1p with space for your electronic parts. Deckel_v1 is my first version with 4 holders for T12 irons but i can´t use 4 because there ist the 24V plug into the quicko... so i made v2 Deckel_v2 is the new version with only 2 T12 iron holders. When you put the parts together use 6x 3,5x16/19mm. A Screw with M5x20 and a washer is to fix the solder. The switch has about 20mm in the front. For the Quicko T12-942 you need a little peace of foam on the ground, then the quicko fits perfectly. I used a white 1cm thick foam and marked it black in the front with a Edding. Pushed it down and fixed it with the Buegel.stl. More about the electronic you can find in the austrian Forum cnc-aus-holz.at https://www.cnc-aus-holz.at/index.php?thread/1342-mobile-l%C3%B6tstation/&postID=15072#post15072 Have fun with your new mobile soldering station.
Statistics
Likes
20
Downloads
0