Dell WD19 Dock Monitor mount
Description
I designed this thing, cause I don't want to put my Dell Laptop and Docking Station under my desk. And on my desk, I don't have enough free space. I already saw other Dell Dock mount solutions on Thingiverse. But most of them are for the WD15, so I had to design a new one for myself. This dock fits the **Dell WD19** on the **Dell U3417W** and **Dell P2720D** Monitor stand. After you printed and glued the parts together, you can slide in the dock from the side. Optionally you can screw the dock to the mount with 2 small screws (M2,5, holes in Docking station are 5mm deep). With this mount, all cables will come out on the bottom side so you can tie them together with the cables from the monitor itself. **Warning: In V11 the size of the backplate is NOT perfect. I need to remove some parts of the object with my Dremel.** If you have good screws it maybe is enough, to just print the main part and screw the dock to the station without the cover part. Let us know if you have printed this and share your make. :-) ## Updates ### 2021-04-22 - v18 I added a new mount for the Dell P2720D monitor mount and a pdf document which you can print on paper (original size!) and cut out the inner parts to test if one of these mounts also fit on your monitor stand. ### 2021-04-20 - v12 I added the v12 where I changed some things on the backplate. I hope that in this version every port is accessible. I've not tested this and every feedback is appreciated!
Statistics
Likes
34
Downloads
0