Smooth fang REMIX - high clearance and adjustable
Description
**Thanks so much for the smooth fang - beautiful model!** I wanted to add a few changes for my Ender 2: - Higher clearance (due to current bed). - Adjustable height for fine tuning. - Holes for a strip holding filament tube and wires. Since the original file is larger than the current max of 25Mb on tinkercad, I tweaked the polygon count in Meshmixer, and continued in Tinkercad. I split the model approx. 2/3 up, and adjusted the height of the upper part. Re-grouped the two parts and now the fangs have a slightly steeper angle, and the clearance is higher. Next, I added slots instead of holes, in the fins, in order to be able to do height adjustement. I finally re-inforced the 5015 chamber slightly and added holes for a strip to hold wires. That's it! *The pics show the fang remix printed on a heavily modified Ender 2.* **Note:** In case you haven't got a decent part cooler, you might have to add supports. Also, I didn't use a raft, but a brim, just to make sure the model would stay in place.
Statistics
Likes
16
Downloads
0