Makeup Holder and Shelf (2 part)
Description
This is a beautiful makeup holder that I designed for my girlfriend. As uploaded, this is two main pieces, the shelving unit and the holding unit. The shelving unit has been designed for makeup variations over time as each slot is 0.5in apart. The shelving inserts have been designed to have a beautiful tolerance close to a loose running fit. I have experienced no pinching or locking from my prints. The parts can be glued together to create a solid unit (which is what I have done in the image) but they can also be used separately as uploaded. The holes in the back allow for wall mounting and are sized for a #4 (I used #4 wood screws). Overall dimensions are roughly L x W x H of 7" x 3 3/8" x 5" Edit 1: Added signature to the back of the parts, tried to fix the STL so the STL image didnt show the backside of the part but no luck with that change. Edit 2: My two original parts (final shelving unit and shelf base) were uploaded to be stand alone pieces and are walled on both sides for stand alone purposes. For my actual application I knew I was going to glue them together so I removed the one wall on the final shelving unit. This option has now been included under final shelf unit_no wall. FIRST POST so i'm sure i'll have a couple more edits. Comments or suggests are always appreciated.
Statistics
Likes
53
Downloads
0