Wanhao i3 V2.1 Melzi to SKR v1.3 adapter
Description
I highly recommend using [this](https://www.thingiverse.com/thing:2895849) instead of mine. The MKS Gen L and SKR v1.3 are the same size and OmNomNomagon's adapter is both easier to print and supports a raspberry pi and a mosfet. I'll leave mine up but I highly recommend you download theirs instead. An adapter I designed in Fusion 360 to adapt the old Melzi mounting holes to the BIQU SKR v1.3. This is my first finished fusion 360 model but because I don't have the SKR v1.3 and I blew up my Melzi this is untested. This should be compatible with all Wanhao Duplicator i3 clones that have the external control box. This will not work with the Plus clones It should use a M3 screws to mount the SKR v1.3 but you will probably have to use the screw to tap the hole. The adapter is held in place with the old screws If anyone want's to test this feel free to post a comment and tell me how it goes, also pictures are coming as soon as I get my skr v1.3! Rotation issue should be fixed and it should be printable right from the download
Statistics
Likes
4
Downloads
0