Raspberry Pi 4 case with 100mm VESA mount
Description
***Big thanks to plammers for the original design!!!*** <h2>***Here you will find two remixes in one: ***</h2> 1. I did a quick and dirty remix of the bottom to have a ***VESA 100x100 mm mount***. I does slice with FlashPrint (Flashforge software) - I had problems slicing it with ideamaker. Try and report back if you find other slicers that work. 2. Also I did a Top that supports the fan shim of pimoroni. You should be able to use the added button to press the tactile switch on the shim inside. https://shop.pimoroni.com/products/fan-shim Make sure to not short the shim to the wifi module metal shield! I but on some extra nuts under the shim screw to act as spacer! Also I tested with the original raspberry foundation HDMI cables. This case works nicely with these cables. I included the original Top for convenience, should you not need my new Top Design. Have fun!
Statistics
Likes
78
Downloads
0