Bike Wall Mount
Description
Close to the wall, stays safely in the mount, easy to hang it. Wheel support reinforced three screws 4x55mm on the reverse side. Are made for wheels with a diameter of 660 mm (26 inches), but they will work with other wheel sizes. When printing, rotate the part by 90 degrees. Bicycle mounted on the pedal. Initially, I wanted to design a pedal bracket for 3d printing, but I doubt the reliability of such an attachment. It has the main cantilever load, so it is made of metal. The bracket is made of sheet metal 4 mm thick (see the dxf file), you need to cut it out with a laser and bend it. If there is no such possibility, then the angle grinder will help. According to calculations, the bracket must withstand more than 50 kg.
Statistics
Likes
47
Downloads
0