s500 s550 multirotor landing gear remix
Description
Remix of S500 landing gear by overbye. Changes include: - increased tube holes by 0.5mm so that there is some slight 'give' to the plastic while tightening bolts. - Added extra thickness to the lower part, which for me would crack easily. Print Recommendations: - Print with bottom of Tee flat on the bed (so layers are parallel with 10mm tube hole) - I used 6 walls (outer shells) which greatly improved the strength (infill 40%). NOTE: - this design (the original) requires that you drill a hole in the end of your carbon fiber tube. Be careful! I used masking tape and a drill at slow speed. Here's a video explaining it: https://www.youtube.com/watch?v=pUo-Sfa1Bbw
Statistics
Likes
14
Downloads
0