Aerodynamic cooler for Tronxy x5s and Ender 3
Description
This is an aerodynamically optimized component cooler and extruder cooler. The combination fits through its individual mounting plate on Ender 3 and on the Tronxy x5s. The cooler is the same for both printers. Only the right mounting plate is needed. The cooling channel for cooling the component was simulated and optimized with ANSYS. As a basis for the required volumetric flow of the fan, the Noctua fan served in 2 interpretations. Once with 6.6 m³ / h and once with 8.2m³ / h. Both versions provide an optimally cooled component, as well as a very well cooled extruder. The printing time at 100% infill is about 6 hours for the cooler and 1 hour for the mounting plate. Required fans: 2x 40x10 fan (preferably Noctua) Required screws: 8x M4x20 hexagon socket 4x M3x12 hexagon socket 2x M3x8 hexagon socket 4x M3 nut 4x M4 nut Have fun printing!
Statistics
Likes
83
Downloads
0