Drone Frame
Description
Simple small 250 class drone frame prepared for aerial photography. The arms can hold up to 30a esc and are designed for 22xx series brushless motors with 5-inch propellers. On the front it is possible to install a small brushless motor like the 1806 for gimbal, I will then post the structure to create a micro gimbal with 2 axes. In the lower part it is possible to install an optical sensor such as the cx-of in addition to a tfmini. The hole on the top cover and on the GPS cap can contain a sonar like the maxbotic i2c or the cheaper radiolink sui10. All parts are printed with a 30% infill. The use of the supports is necessary only for the upper cover and for the GPS plug
Statistics
Likes
21
Downloads
0