Spinning Revolver Pen Pencil Holder
Description
This is a re-mix from DigChaos. I liked the look but when I printed it things didn't work out for me. So, I redrew/designed everything in Fusion360 from scratch and added my own twists. I made the openings larger, closed off the top, made it more friendly to print without supports, and added a place to put your name on it. I have included the Fusion360 file for the base you can personalize with a NAME. I have made 6 of these so far and the parts are a little snug but go together nicely. The pin often has a Z seam that may need to be sanded down for things to go together properly. Depends on your slicer and printer. You will need 2 skateboard bearings, model #6900ZZ 10 x 22 x 6 mm Deep Groove Ball Bearings. These may be a tight fit into the cylinder. I used a screwdriver to push the first bearing to the top of the main part. Original Upload 7/28/2019 8/15/2019 Added 6 Hole version so you have a choice of 7 hole or 6 hole cylinders. 9/2/2019 Uploaded Fusion360 file for the base with a name so you can personalize your own. #For the latest on this project and others, join my group:# https://www.facebook.com/groups/3DPrinterModding/ All Tips go back into the projects to be able to support more hardware. Thank you
Statistics
Likes
113
Downloads
0